HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 124)

124 2 - C ONFIGURING THE HP EFS WAN A CCELERATOR
Activating
Configurations You can activate a previous configuration. When you activate a configuration it
becomes the current, running configuration.
To activate a
configuration 1. Click the Setup tab to display the Setup: Optimization Service - General Settings
page.
2. Click Configuration Manager in the left menu to display the Setup: Configuration
Manager page.
Figure 2-58. Setup: Configuration Manager Page
3. In the Configuration list, click the check box next to the configuration you want to
activate.
4. Click Activate Selected Configuration to activate the configuration. When you
activate a configuration, the settings in that configuration file become the running
configuration.
IMPORTANT: You must restart the HP EFS WAN Accelerator service for this configuration
to take effect. For detailed information, see
“Starting and Stopping the HP EFS WAN
Accelerator Service and PFS” on page 127 .
TIP: To delete configurations, in the Configuration list, click the check box next to the name of
the configuration you want to delete and click Remove Selected Configuration.