HP Color LaserJet 5550 Printer series - Manual (Page 177)

Control panel message Description Recommended action
Clearing event log This message is displayed while the
event log is cleared. The printer will exit
the MENUS once the event log has been
cleared. No action necessary.
Clearing paper path The printer jammed or detected
misplaced paper when turned on. The
printer is attempting to eject jammed
pages automatically. No action necessary.
CLOSE FRONT COVERS
For help press
The covers need to be closed. Close front covers.
Note
This message might also appear if the
fuser is missing or incorrectly installed.
Ensure that the fuser is correctly installed.
DATA RECEIVED
To print last page press
alternates with
Ready
To print last page press
The printer received data and is waiting
for a form feed. When the printer
receives another file, the message
should disappear. Press to continue printing.
Deleting... The printer is currently deleting the
stored job. No action necessary.
DISK DEVICE
FAILURE
To clear press
alternates with
Ready
A device failure has occurred on the
specified drive. Printing may continue for
jobs that do not require access to the
disk drive. 1. To clear the message, press the
key.
2. If the message persists, remove and
re-install the EIO disk drive.
3. Turn the printer back on.
4. If the message still persists, replace
the EIO disk drive.
DISK FILE
OPERATION FAILED
To clear press
alternates with
Ready
The printer received a PJL file system
command that attempted to perform an
illogical operation (for example, to
download a file to a non-existent
directory). Printing may continue. 1. To clear the message, press the
key.
2. If the message persists, turn the
printer off and then back on.
3. If the message reappears, there
may be a problem with the software
application.
DISK FILE
SYSTEM IS FULL
To clear press
alternates with
Ready
The printer received a PJL file system
command that attempted to store
something on the file system but was
unsuccessful because the file system is
full. 1. Use the HP Web Jetadmin software
to delete files from the EIO disk
drive, or delete the stored job from
the printer control panel.
2. To clear the message, press the
key.
3. If the message persists, turn the
printer off and then back on.
Control panel messages (continued)
ENWW Control panel messages 163