HP Color LaserJet 5550 Printer series - Manual (Page 212)

5. Grasp the front cover and pull down.
6. Grasp the green handles on the transfer unit and pull down.
CAUTION Do not place anything on the transfer unit while it is open. If the transfer unit is damaged,
print quality problems may result.
7. If the paper is wrapped around the fuser roller or stuck in the rollers, grasp the paper by
both corners and pull down.
Note If the paper is wrapped around the roller, it is important to pull down on the paper to remove
it. Pulling up on the paper can damage the fuser rollers and cause print quality problems.
WARNING! Do not reach into the fuser until it has cooled.
Note If the paper tears, make sure that all paper fragments are removed from the paper path
before resuming printing.
198 Chapter 8 Problemsolving ENWW