HP Color LaserJet 5550 Printer series - Manual (Page 30)

Operating System To change settings
for all immediate
print jobs (until the
application is closed) To change print job
default settings
(For example, turn
on Print on Both
Sides by default.)
To change
configuration settings
(For example, add a
physical option such
as a tray or enable/
disable a driver
feature such as
Allow Manual
Duplexing.)
Windows 98, NT 4.0,
and ME From the File menu in
the application, click
Print. Select the
printer, and then click
Properties. (The
steps may vary; this
procedure is most
common.) Click Start, click
Settings, and then
click Printers. Right-
click the printer icon,
and choose
Properties (Windows
98 and ME) or
Document Defaults
(NT 4.0). Click Start, click
Settings, and then
click Printers. Right-
click the printer icon,
and choose
Properties. Select the
Configure tab.
Windows 2000 and XP From the File menu in
the application, click
Print. Select the
printer, and then click
Properties or
Preferences. (The
steps may vary; this
procedure is most
common.) Click Start, click
Settings, and then
click Printers or
Printers and Faxes.
Right-click the printer
icon, and choose
Printing Preferences. Click Start, click
Settings, and then
click Printers or
Printers and Faxes.
Right-click the printer
icon, and choose
Properties. Select the
Device Settings tab.
Macintosh OS 9.1 On the File menu,
click Print. Change
the settings that you
want on the various
pop-up menus. On the File menu,
click Print. As you
change settings on the
pop-up menu, click
Save Settings. Click the desktop
printer icon. From the
Printing menu, click
Change Setup.
Macintosh OS X 10.1 On the File menu,
click Print. Change
settings that you want
on the various pop-up
menus. On the File menu,
click Print. Change
settings that you want
on the various pop-up
menus, and then on
the main pop-up
menu, click Save
Custom Setting.
These settings are
saved as the Custom
option. To use the new
settings, you must
select the Custom
option every time you
open a program and
print. Delete the printer and
reinstall. The driver will
be auto-configured
with the new options
when it is reinstalled.
(AppleTalk
connections only)
Note
Configuration settings
may not be available
in Classic mode.
16 Chapter 1 Printer basics ENWW