HP Color LaserJet 5550 Printer series - Manual (Page 61)

Menu item Values Description
SHOW ADDRESS AUTO
OFF
This item determines whether
the printer’s IP address is
shown on the display with the
Ready message. If more than
one EIO card is installed, the IP
address of the card in the first
slot is shown. The default is OFF.
COLOR/BLACK MIX AUTO
MOSTLY COLOR PAGES
MOSTLY BLACK PAGES
AUTO will reset the printer to
the factory default setting.
MOSTLY COLOR PAGES will
exhibit the NEVER SWITCH
behavior to maximize
performance.
MOSTLY BLACK PAGES will
exhibit the LOOK AHEAD
FIRST behavior to improve
cost per page as possible while
minimizing impact to
performance.
TRAY BEHAVIOR USE REQUESTED TRAY
MANUAL FEED PROMPT
PS DEFER MEDIA
Submenu that allows access to
tray behavior options. (This
setting allows you to configure
the trays to behave like trays in
some previous HP printers.)
See Tray behavior options: Use
Requested Tray and manually
feed
for more information.
PS DEFER MEDIA affects how
paper is handled when printing
from an Adobe PS print driver.
ENABLED uses HP paper
handling. DISABLED uses the
Adobe PS paper handling. The
default is ENABLED.
POWERSAVE TIME 1 MINUTE
15 MINUTES
30 MINUTES
60 MINUTES
90 MINUTES
2 HOURS
4 HOURS
Reduces power consumption
when the printer has been
inactive for an extended period.
See
Changing printer control
panel configuration settings .
PERSONALITY AUTO
PCL
PDF
MIME
PS
Sets the default personality to
automatic switching, PCL, or
PostScript emulation.
See Personality for more
information.
ENWW Configure device menu 47