HP Color LaserJet 5550 Printer series - Manual (Page 97)

13. Open the tray.
14. Move the side guides out.
15. Load paper in the tray with the side to be printed on facing down, and the top of the
paper on the left. Make sure that the stack height of the paper does not exceed the
maximum stack height mark in the tray.
Note If you are duplexing, see Two-sided (duplex) printing for load instructions.
16. Adjust the side guides so that they will lightly touch the paper stack but will not bend the
paper.
17. The printer displays the tray configuration. It should match the size and type set in steps
1-12 above. Press to accept the settings and exit the message. The tray is ready for
use.
ENWW Configuring input trays 83