HP Color LaserJet 5550 Printer series - Manual (Page 224)

3. Grasp the paper by both corners and pull down.
Note If the paper tears, make sure that all paper fragments are removed from the paper path
before resuming printing.
4. Firmly pull forward on the two green levers to disengage the fuser rollers.
WARNING! Do not touch the fuser. It is hot and could cause burns! The fuser’s operating temperature is
190°C (374°F).Wait 10 minutes to allow the fuser to cool before touching it.
5. Open the fuser cover.
6. Inspect the fuser and remove any paper that is crumpled in the fuser.
WARNING! Do not reach into the fuser until it has cooled.
Note If the media tears, make sure that all media fragments are removed from the paper path
before resuming printing.
210 Chapter 8 Problemsolving ENWW