HP Color LaserJet 5550 Printer series - Manual (Page 70)

To disable/enable PowerSave
1. Press M
ENU
to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press to select CONFIGURE DEVICE.
4. Press to highlight RESETS.
5. Press to select RESETS.
6. Press to highlight POWERSAVE.
7. Press to select POWERSAVE.
8. Press or to select ON or OFF.
9. Press to set the selection.
10. Press M
ENU
.
Personality
This printer features automatic personality (printer language) switching.
● AUTO configures the printer to automatically detect the type of print job and configure its
personality to accommodate that job.
● PCL configures the printer to use Printer Control Language.
● PDF configures the printer to print PDF files.
● MIME configures the printer for use with hand-held devices such as cellular phones and
personal digital assistants (PDAs).
● PS configures the printer to use PostScript emulation.
To set the personality
1. Press M
ENU
to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press to select SYSTEM SETUP.
6. Press to highlight PERSONALITY.
7. Press to select PERSONALITY.
8. Press or to select the appropriate personality (AUTO, PS, PCL, or PDF).
9. Press to set the personality.
10. Press M
ENU
.
56 Chapter 2 Control panel ENWW