HP Color LaserJet 5550 Printer series User Manual
Page 218
Advertising
5. Grasp the media by both corners to remove it, if possible.
Note
If the media tears, make sure that all media fragments are removed from the paper path
before resuming printing.
6. Firmly pull forward on the two green levers to disengage the fuser rollers.
WARNING!
Do not touch the fuser. It is hot and could cause burns! The fuser operating temperature is
190 °C (374°F). Wait ten minutes to allow the fuser to cool before touching it.
7. Open the fuser cover.
204
Chapter 8 Problemsolving
ENWW
Advertising