Turn off the hp all-in-one – HP Photosmart C4344 All-in-One Printer User Manual
Page 109
9.
Repeat if necessary for the other print cartridge.
10.
Gently close the print cartridge door and plug the power cord into the back of the
product.
Related topics
“Clean the print cartridges” on page 100
Turn off the HP All-in-One
To avoid damaging the product, you must properly shut it down by using the On button
located on the product. Wait until the On light turns off before you unplug the power cord
or turn off a power strip.
Reduce energy consumption when the HP All-in-One is off
When the HP All-in-One is off, an amount of energy is still being consumed. Energy
consumption can be lessened by enabling the Standby/Off state.
NOTE:
When the HP All-in-One is in the Standby/Off state, it will take longer than
usual to turn back on.
To enable the Standby/Off state
▲
Press and hold the On button for 3 seconds until the product turns off.
Chapter 12
106
Maintain the HP All-in-One
Maintain
the HP All-in-One