HP Photosmart C4344 All-in-One Printer - Manual (Page 67)

To print an enlargement of a photo
1. Load letter- or A4-sized photo paper in the input tray.
2. Insert your memory card into the appropriate slot on the product.
3. Press the buttons next to the up arrow and down arrow icons on the display to scroll
through the photos on your memory card until the photo you want to print appears.
4. Do one of the following:
•
Press the Size button until Resize to Fit is the selected setting on the display.
Your printed photo will be enlarged and centered to fit the printable area of the
page, and will be either bordered or borderless on all four sides depending on the
aspect ratios of the digital photo and the paper on which you are printing.
• Leave the default Size setting as Borderless.
Your printed photo will be enlarged to fill the entire page size and will be
borderless. This could result in some parts of the image being cropped.
NOTE: The default Quality setting is set to best mode (as indicated by the three
star icons on the display) and cannot be changed.
5. Press the Copies button until the number of copies you want to print appears on the
display.
6. Press the button next to Print on the display.
TIP: While the photo is printing, you can continue scrolling through the photos
on your memory card. When you see a photo you want to print, you can press the
Print button to add that photo to the print queue.
Print photos from the HP Photosmart Software
You can use the HP Photosmart Software installed on your computer to transfer photos
from a memory card to your computer’s hard drive for advanced photo editing, sharing
photos online, and printing from your computer.
Before transferring photos to your computer, you need to remove the memory card from
your digital camera and insert it in the appropriate memory card slot on the HP All-in-One.
NOTE: The HP All-in-One must be connected to a computer that has the
HP Photosmart Software installed on it.
Chapter 8
64 Use the photo features
Photos