HP Photosmart C4344 All-in-One Printer - Manual (Page 22)

If you experience problems sending and receiving faxes, you might want to try setting the
Fax Speed setting to Medium (14400) or Slow (9600).
To set the fax speed from the control panel
1. Press the button next to Scan/Fax.
2. Press the button next to Fax Menu.
3. Press the button next to Fax Setup.
4. Press the button next to the down arrow to highlight Fax Speed, and then press the
button next to OK.
5. Press the button next to the down arrow to select one of the following settings, and
then press the button next to OK.
Fax speed setting Fax speed
Fast (33600) v.34 (33600 baud)
Medium (14400) v.17 (14400 baud)
Slow (9600) v.29 (9600 baud)
Choose the recommended answer setting for your setup
The Auto Answer setting determines whether or not the HP All-in-One answers incoming
calls, as well as how many rings to wait before answering. The correct setting depends
on how your home or office is set up. From the first column in the table below, choose
the type of equipment and services applicable to your setup. Then, look up the appropriate
setting in the second column. The third column describes how the HP All-in-One answers
incoming calls.
To set the Auto Answer setting
1. Press the button next to Scan/Fax.
2. Press the button next to Fax Menu.
3. Press the button next to Fax Setup.
4. Press the button next to the down arrow to highlight Auto Answer, and then press
the button next to OK.
5. Press the button next to the appropriate setting, based on the information in the table,
and then press the button next to OK.
Equipment/services
sharing your fax line Recommended Auto
Answer setting
Description
None.
(You have a separate
phone line on which you
receive only fax calls.) On
(Select the number of
rings to wait before
answering.) The HP All-in-One automatically answers all incoming
calls based on the number of rings to wait.
A shared voice and fax
line and no answering
machine.
(You have a shared
phone line in which you Off
(Select Don't answer.) The HP All-in-One will not answer calls. You must
press the button next to Scan/Fax and the button next
to Start Fax to receive a fax.
Fax setup 19
Finish
set
ting up t
h
e HP All-in-
O
ne