Fax over the internet using ip phone, Stop faxing, Fax over the internet using ip phone stop faxing – HP Photosmart C4344 All-in-One Printer User Manual

Page 87

Advertising
background image

5.

Press the button next to Start Fax.
The Fax Mode screen appears.

6.

Press the button next to the down arrow to highlight Receive Fax Manually, and then
press the button next to OK.
After the product begins to receive the fax, you can hang up the phone or remain on
the line. The phone line is silent during fax transmission.

Fax over the Internet using IP phone

You might subscribe to a low-cost phone service that allows you to send and receive
faxes with the HP All-in-One by using the Internet. This method is called Fax over Internet
Protocol (FoIP). You probably use a FoIP service (provided by your telephone company)
if you:

Dial a special access code along with the fax number, or

Have an IP converter box that connects to the Internet and provides analog phone
ports for the fax connection.

NOTE:

You can only send and receive faxes by connecting a phone cord to the 1-

LINE port on the back of the HP All-in-One. This means that your connection to the
Internet must be done either through a converter box (which supplies regular analog
phone jacks for fax connections) or your telephone company.

The FoIP service might not work properly when the HP All-in-One is sending and receiving
faxes at high speed (33600 bps). If you experience problems sending and receiving faxes,
use a slower fax speed. You can do this by changing the Fax Speed setting from Fast
(33600)
(the default) to Medium (14400) or Slow (9600).

You should also check with your telephone company to make sure their Internet phone
service supports faxing. If they do not support faxing, you might encounter intermittent
problems when trying to send and receive faxes through the Internet.

Related topics

“Set the fax speed” on page 18

Stop faxing

You can cancel a fax you are sending or receiving at any time.

To stop faxing from the control panel

Press Cancel on the control panel to stop a fax you are sending or receiving. If the
product does not stop faxing, press Cancel again.
The product prints any pages it has already started printing and then cancels the
remainder of the fax. This can take a few moments.

To cancel a number you are dialing

Press Cancel to cancel a number you are currently dialing.

Chapter 11

84

Use the fax features

Fa
x

Advertising