HP Photosmart C4344 All-in-One Printer - Manual (Page 171)

This special 2-wire phone cord is different from the more common 4-wire phone cords
you might already have in your office. Check the end of the cord and compare it to
the two types of cords shown below.
Make sure you used the phone cord supplied in the box with the product to connect
to the telephone wall jack.
One end of this special 2-wire phone cord should be connected to the port labeled 1-
LINE on the back of the product and the other end to your telephone wall jack, as
shown below.
1 Telephone wall jack
2 Use the phone cord supplied in the box with the product
If you used a 4-wire phone cord, disconnect it, find the supplied 2-wire phone cord,
and then connect the 2-wire phone cord to the port labeled 1-LINE on the back of the
product.
If the product came with a 2-wire phone cord adapter, you can use it with a 4-wire
phone cord, in case the supplied 2-wire phone cord is too short. Attach the 2-wire
phone cord adapter to the port labeled 1-LINE on the back of the product. Attach your
4-wire phone cord to the open port on the adapter and to the telephone wall jack. For
more information on using the 2-wire phone cord adapter, see the documentation that
came with it.
For more information on setting up the product, see the printed documentation that
came with the product.
Cause: The wrong phone cord was used to connect the product or the phone cord
was plugged into the wrong port.
Chapter 14
168 Troubleshooting
T
roub
les
hoot
ing