Change the lighter/darker setting, Set new default settings – HP Photosmart C4344 All-in-One Printer User Manual
Page 27
•
Very Fine: provides the best quality fax when you are faxing documents with very
fine detail. If you choose Very Fine, be aware that the faxing process takes longer to
complete and you can only send black-and-white faxes using this resolution. If you
send a color fax, it will be sent using Fine resolution instead.
•
Photo: provides the best quality fax when sending photographs in black and white.
If you choose Photo, be aware that the faxing process takes longer to complete.
When faxing photographs in black and white, HP recommends that you choose
Photo.
When you exit the Fax menu, this option returns to the default setting unless you set your
changes as the default.
To change the resolution from the control panel
1.
Press the button next to Scan/Fax.
2.
Press the button next to Fax Menu.
3.
Press the button next to Fax Settings.
4.
Press the button next to the down arrow to highlight Resolution, and then press the
button next to OK.
5.
Press the button next to the down arrow to highlight a resolution setting, and then
press the button next to OK.
NOTE:
If you send a color fax, the fax is sent using the Fine setting.
Change the
Lighter/Darker
setting
You can change the contrast of a fax to be darker or lighter than the original. This feature
is useful if you are faxing a document that is faded, washed out, or handwritten. You can
darken the original by adjusting the contrast.
NOTE:
The Lighter/Darker setting applies to black and white faxes only, not color
faxes.
When you exit the Fax menu, this option returns to the default setting unless you set your
changes as the default.
To change the Lighter/Darker setting from the control panel
1.
Press the button next to Scan/Fax.
2.
Press the button next to Fax Menu.
3.
Press the button next to Fax Settings.
4.
Press the button next to the down arrow to highlight Lighter/Darker, and then press
the button next to OK.
5.
Press the button next to the down arrow to darken the fax or the button next to the
up arrow to lighten the fax, and then press the button next to OK.
Set new default settings
You can change the default value for the Resolution and Lighter/Darker settings
through the control panel.
Chapter 5
24
Finish setting up the HP All-in-One
Finish set
ting up th
e HP All-in-
O
ne