HP Photosmart C4344 All-in-One Printer - Manual (Page 163)

Cause: The product cropped some of the image around the margins of the copy to
achieve a borderless print without changing the proportions of the original.
If this did not solve the issue, try the next solution.
Solution 2: Use Resize to Fit to reduce the original to fit on the paper
Solution: If your original is larger than the paper in the input tray, use the Resize
to Fit feature to reduce your original to fit on the paper in the input tray.
For more information, see:
“Resize an original to fit onto letter or A4 paper” on page 72
Cause: The original was larger than the paper in the input tray.
The printout is blank
Solution: Load the original print side down on the right front corner of the glass as
shown below.
Cause: The original was placed incorrectly on the glass.
A borderless copy has white space around the edges
Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.
• Solution 1: Scan, resize, and print the image
• Solution 2: Use photo paper to make borderless copies
Solution 1: Scan, resize, and print the image
Solution: When you make a borderless copy of a very small original, the product
enlarges the original up to a maximum percentage. This might leave white space
around the edges. (The maximum percentage varies by model.)
Chapter 14
160 Troubleshooting
T
roub
les
hoot
ing