AMD SB600 - Manual (Page 265)

©2008 Advanced Micro Devices, Inc. Host PCI Bridge Registers (Device 20, Function 4)
AMD SB600 Register Reference Manual Proprietary Page 265
3.2 Host PCI Bridge Registers (Device 20, Function 4)
Note: Some PCI functions are controlled by, and associated with, certain PCI configuration registers in the
SMBus/ACPI device. For more information refer to
section 2.3: SMBus Module and ACPI Block (Device 20,
Function 0) . The diagram below lists these PCI functions and the associated registers.
PCI
PCI Stop Clock enable
PCI Bridge Soft Reset Enable
PCI Bus drive strength registers
C0h 6Ch 64h
PCI_Reg:
PCI Bridge (PCIB) has one set of configuration registers in PCI configuration space identified by PCI function
4 on the South Bridge.
Table 3-1 PCI-to-PCI Bridge Configuration Registers Summary
Register Name Offset Address
Vendor ID 00h
Device ID 02h
PCI Command 04h
PCI Device Status 06h
Revision ID/Class Code 08h
Cache Line Size 0Ch
Latency Timer 0Dh
Header Type 0Eh
Reserved 0Fh
Primary Bus Number 18h
Secondary Bus Number 19h
Subordinate Bus Number 1Ah
Secondary Latency Timer 1Bh
IO Base 1Ch
IO Limit 1Dh
Secondary Status 1Eh
Memory Base 20h
Memory Limit 22h
Prefetchable Memory Base 24h
Prefetchable Memory Limit 26h
IO Base Upper 16 Bits 30h
IO Limit Upper 16 Bits 32h
Capability pointer 34h
Reserved 36h
Interrupt Line 3Ch
Interrupt Pin 3Dh
Bridge Control 3Eh
Chip Control 40h
Diagnostic Control 41h
CLK Control 42h
Arbiter Control and Priority Bits 43h
SMLT Performance 44h
PMLT Performance 46h
PCDMA 48h