5 ports, Ports – Allied Telesis AlliedView-EMS 3.10 QoS MANAGER User Manual
Page 101
Property
Name
Description
Valid Values
Class
Storm
Action
detected on a port.
•
VLANDISABLE
Default
Traffic
Class
Storm
Timeout
Specifies the length of
time the port remains
disabled after a storm is
detected.
This value can be set by entering a
number from 1-86400.
This can also be set to "none".
Mark Value This parameter specifies
an explicit value to use as
an index into the
DSCPMAP table when the
dtcpremarking parameter
is usemarkvalue.
Range: none, 0-63
Port
Specifies the port where
unclassified traffic is sent
when the default traffic
class action is
sendvlanport. The port
must belong to the VLAN
specified by the VLAN
parameter.
This can be set by selecting any one of
the following values:
•
port 1 - n (n = number of ports
available)
•
none
VLAN
Specifies the VLAN where
unclassified traffic is sent
when the default traffic
class action
issendvlanport. Traffic is
sent over the port
specified by the port
parameter so the VLAN
must contain that port.
This can be set by selecting from a list of
available VLANs.
Traffic
Class List
Specifies a list of the
Traffic Classes currently
assigned to this Policy.
Select from a list of available Traffic
Class IDs.
6.7.5 Ports
Column Name Description
Valid Values
Port
(cannot be
modified)
Lists the ports available
Available ports will depend on
the device model
Policy
Specifies the policy to associate
with the port
Select from a list of available
policies
AlliedView™-EMS 3.10 QoS Manager User’s Guide
Page 101 of 128