Allied Telesis AlliedView-EMS 3.10 QoS MANAGER - Manual (Page 112)

Property Name Description Valid Values
Source TCP
Port Specifies the TCP source port
of a TCP/IP packet. Range: any, 0-65535 or a port
range (n-m).
Destination
TCP Port Specifies the TCP destination
port of a TCP/IP packet. Range: any, 0-65535 or a port
range (n-m).
Source UDP
Port
Specifies the UDP source port
of a TCP/IP packet.
Range: any, 0-65535 or a port
range (n-m).
Destination
UDP Port Specifies the UDP destination
port of a TCP/IP packet. Range: any, 0-65535 or a port
range (n-m).
Source IPX
Socket Specifies the source IPX socket
number of an IPX packet This can be set by entering a 4-
byte hexadecimal value (0000-
FFFF) or by selecting one of the
following:
• NCP
• SAP
• RIP
• NNB
• DIAG
• NLSP
• IPXWAN
• any
Destination
IPX Socket Specifies the destination IPX
socket number of an IPX
packet This can be set by entering a 4-
byte hexadecimal value (0000-
FFFF) or by selecting one of the
following:
• NCP
• SAP
• RIP
• NNB
• DIAG
• NLSP
• IPXWAN
• any
Match1 Specifies the actual data to
match This can be set by entering a 4-
byte hex number. (0000-FFFF)
Mask1 Specifies whether the
corresponding bit in the
Match1 parameter is "on" for a
match or "don't care" for a
match. This can be set by entering a 4-
byte hex number. (0000-FFFF)
Offset1 Specifies the location or offset
where the pattern for Match1 is Range: 0-62
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 112 of 128