Allied Telesis AlliedView-EMS 3.10 QoS MANAGER - Manual (Page 58)

6.5.3.1 Add/Modify Traffic Class
Property Name Description Valid Values
Traffic Class ID
(cannot be
modified) Specifies the unique identifier
for this Traffic Class. Range: 0-511
Description Specifies a brief description of
the Traffic Class. To set this value, enter an
alphanumeric string from 1-15
characters.
Exceed Action Specifies the action to take if
the traffic classes
maxbandwidth is exceeded.
• drop
• remark
Exceed Remark
Value Specifies the DSCP
replacement value for traffic
that exceeds the
maxbandwidth. Range: 0-63
Mark Value Specifies a replacement value
to write into the DSCP (TOS)
field for all packets. Range: 0-63
Maximum
Bandwidth Specifies the maximum
bandwidth available to the
traffic class. Range: none, 0-1016
Burst Size Specifies the size of a token
bucket for the Traffic Class. Range: none, 4-512
Priority Specifies the priority value in
the IEEE Standard 802.1p tag
control field that traffic
belonging to this traffic class is
assigned.
Range: 0-7
Remark
Priority Specifies whether the value of
the priority parameter is used
to set the egress queue
selection for a frame and also
to replace the 802.1p priority
value in the frame, or just to
select the egress queue for the
frame.
• yes
• no
Type of Service Specifies the replacement value
to write in the Type of Service
field of IPv4 packets.
Range: none, 0-7
Move TOS to
Priority
Specifies whether or not the
value in the 802.1p priority field
will be replaced with the value
in the ToS priority field on IPv4
packets.
• yes
• no
Move Priority Specifies whether or not the • yes
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 58 of 128