Allied Telesis AlliedView-EMS 3.10 QoS MANAGER - Manual (Page 111)

Property Name Description Valid Values
IPX Packet Specifies the value of the
Packet Type field of an IPX
packet. This can be set by selecting any
of the following values:
• NLSP
• RIP
• SAP
• SPX
• NCP
• NETBIOS
• any
This can also be set by entering
a 4-byte hexadecimal value (00-
FF).
IP Protocol Specifies a Layer 4 IP protocol
of an IP packet This can be set by selecting any
of the following values:
• TCP
• UDP
• NONTCPUDP
• ICMP
• IGMP
• OSPF
• any
This can also be set by entering
an integer from 0-255.
ICMP Type Specifies the ICMP message
type to match against the
ICMP type field in an ICMP
packet header. Range: any, 0-65535
ICMP Code Specifies the ICMP message
reason code to match against
the ICMP code field in an ICMP
packet header.
Range: any, 0-65535
TCP Flags Specifies the TCP flags of the
TCP/IP packet. This can be set by selecting one
or more of the following values:
• URG
• ACK
• RST
• SYN
• FIN
This can also be set to "any".
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 111 of 128