3 scheduling, 4 cos priority, 5 dscp priority – Allied Telesis AlliedView-EMS 3.10 QoS MANAGER User Manual
Page 33: 6 bandwidth, Scheduling, Cos priority, Dscp priority, Bandwidth
Default CoS
Specifies the default CoS value
of an interface
Range: 0-7
6.1.3 Scheduling
Setting
Description
Value
Scheduling
Configures the number of
expedite queues. It is used to
specify the scheduling method
to use.
•
Strict Priority - higher
priority queues are
emptied before any
packets are transmitted
from lower priority
queues
•
Weighted Priority -
packets are transmitted
from all queues in a
round-robin fashion
based on the queue
weights
6.1.4 CoS Priority
Column Name Description
Value
Class of Service
(cannot be
modified)
Lists the CoS values available Range: 0-7
Queue
Specifies the queue number to
which the CoS value is mapped
Range: 1-4
6.1.5 DSCP Priority
Column Name Description
Value
DSCP
(cannot be
modified)
Lists the DSCP values available Range: 0-63
Queue
Specifies the queue number to
which the DSCP value is
mapped
Range: 1-4
6.1.6 Bandwidth
Column Name Description
Value
Interface
(cannot be
modified)
Lists the interfaces (ports and
channels) available
The available interfaces will
depend on the device model
and configuration.
•
standalone - e1, e2..en
•
stacked - 1/e1, 1/e2..1/en,
2/e1, 2/e2..s/en
AlliedView™-EMS 3.10 QoS Manager User’s Guide
Page 33 of 128