Allied Telesis AlliedView-EMS 3.10 QoS MANAGER User Manual
Page 45
Property
Name
Description
Valid Values
Ethernet
Format
Specifies the Ethernet
encapsulation type of the
packet.
This can be set by selecting any
of the following values:
•
802.2
•
802.2-Tagged
•
802.2-Untagged
•
EthII
•
EthII-Tagged
•
EthII-Untagged
•
NetwareRaw
•
NetwareRaw-Tagged
•
NetwareRaw-Untagged
•
SNAP
•
any
Source IP
Address
Specifies the source IP Address
(either host or host/subnet) of
an IP packet.
This can be set by entering an
IP Address in dotted decimal
notation with an optional mask
•
NNN.NNN.NNN.NNN
•
NNN.NNN.NNN.NNN/M
Where M = 0-32
Destination IP
Address
Specifies the destination IP
Address (either host or
host/subnet) of an IP packet.
This can be set by entering an
IP Address in dotted decimal
notation with an optional mask
•
NNN.NNN.NNN.NNN
•
NNN.NNN.NNN.NNN/M
Where M = 0-32.
IP DSCP
This the Code Point bits of the
DiffServ field of an IP packet.
This can be set by entering one
or more integers from 0-63.
Input can be a comma
separated list or a range
(specified as m-n) or a
combination of both. (e.g. 2, 4-
7)
This value can also be set to
"any".
IP Protocol
This specifies a Layer 4 IP
protocol of an IP packet.
This can be set by selecting any
of the following values:
•
TCP
AlliedView™-EMS 3.10 QoS Manager User’s Guide
Page 45 of 128