Allied Telesis AlliedView-EMS 3.10 QoS MANAGER - Manual (Page 121)

Property
Name
Description Valid Values
• NCP
• SAP
• RIP
• NNB
• DIAG
• NLSP
• IPXWAN
• any
This can also be set by entering
a 2-byte hexadecimal value
(0000-FFFF).
Destination
IPX Socket Specifies the destination IPX
socket number of an IPX
packet. This can be set by selecting any
of the following values:
• NCP
• SAP
• RIP
• NNB
• DIAG
• NLSP
• IPXWAN
• any
This can also be set by entering
a 2-byte hexadecimal value
(0000-FFFF).
MAC Type Specifies whether the packet is
a Layer 2 unicast (L2UCAST)
or any other packet
(L2BMCAST).
• L2UCAST
• L2MBCAST
• any
Protocol Specifies the protocol of the
packet.
This can be set by selecting any
of the following values:
• IP
• IPX
• NONIPIPX
• SNA PATH CONTROL
• PROWAY-LAN
• EIA-RS
• PROWAY
• IPX 802.2
• NETBEUI
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 121 of 128