Allied Telesis AlliedView-EMS 3.10 QoS MANAGER - Manual (Page 21)

5.1 File
The File menu lets you connect to and disconnect from a target host, check the
properties of the target host, or exit QoS Manager.
Topics:
• Open
• Close
• Exit
5.1.1 Open
This option allows you to specify a target host to connect to. When you select
File > Open, the following dialog box appears. To connect to the device, fill in
parameters in the dialog box, and click OK.
Note - This option is not available if QoS Manager is already connected to a
target host.
Open dialog box
IP Address
This is the Host Name or IP Address of the target host.
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 21 of 128