Allied Telesis AlliedView-EMS 3.10 QoS MANAGER - Manual (Page 110)

Property Name Description Valid Values
is 0..128.
This value can also be set
to "any".
Destination IP
Address
Specifies the destination IP
Address (either host or
host/subnet) of an IP packet
This can be set by entering an
IPV4 or IPV6 address using the
following format:
• IPv4 address[/mask] -
IPv4 is in dotted decimal
notation, mask is 0..32.
• IPv6 address[/mask] -
IPv6 is in colon separated
hex digit notation, mask
is 0..128.
This value can also be set
to "any".
IP DSCP This the Code Point bits of the
DiffServ field of an IP packet This can be set by entering one
or more integers from 0-63.
Input can be a comma
separated list or a range
(specified as m-n) or a
combination of both. (e.g. 2, 4-
7)
This value can also be set to
"any".
IP Type of
Service Specifies the value of the
precedence field within the
TOS (Type of Service) byte of
an IP packet Range: any, 0-7
IP Fragmented Determines if the IPv4 packets
are fragmented.
• yes
• no
• any
IP Options Determines if the IPv4 header
options will be inlcuded.
• yes
• no
• any
IP Flow Label Specifies the IPv6 Flow Label in
an IPv6 Packet.
Range: any, 0-1048575
Destination
IPX Address Specifies the destination
network address of an IPX
packet. This can be set by entering a 4-
byte hexadecimal value.
(00000001-FFFFFFFF)
This can also be set to "any".
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 110 of 128