Allied Telesis AlliedView-EMS 3.10 QoS MANAGER - Manual (Page 124)

Column Name Description
Flow Groups List of the Flow Groups associated with this
Traffic Class
6.9.3.2 Add/Modify Traffic Class
Property Name Description Valid Values
Traffic Class ID
(cannot be
modified)
Specifies the unique identifier
for this Traffic Class.
Range: 0-511
Description Specifies a brief description of
the Traffic Class. To set this value, enter an
alphanumeric string from 1-15
characters.
Fair Hash Limit Specifies the limit used to
classify hashed flow groups as
"fair" or "aggressive", relative
to the most "aggressive"
hashed flow group.
• low
• modlow
• modhigh
• high
Mark Value Specifies a replacement value
to write into the DSCP (TOS)
field for all packets. Range: none, 0-63
Maximum
Bandwidth
Specifies the maximum
bandwidth available to the
traffic class.
This can be set by entering a
value using one the following
formats:
• 0-16000000 kbps
• 0-16000 Mbps (decimal
point supported)
• 0-16 Gbps (decimal point
supported)
Minimum
Bandwidth Specifies the minimum
bandwidth available to the
traffic class. This can be set by entering a
value using one the following
formats:
• 0-16000000 kbps
• 0-16000 Mbps (decimal
point supported)
• 0-16 Gbps (decimal point
supported)
Number of
Hashed Flows This parameter specifies the
number of hashed flow groups
to be used by the traffic class. • 1
• 2
• 8
• 32
• 64
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 124 of 128