4 at-9000/24, 1 general, 2 traffic class – Allied Telesis AlliedView-EMS 3.10 QoS MANAGER User Manual
Page 53: 3 port priority, At-9000/24
6.4 AT-9000/24
Topics:
•
•
•
6.4.1 General
Setting
Description
Value
QoS Status
Enables/Disables quality of
service (QoS) on the device
•
enabled
•
disabled
6.4.2 Traffic Class
Column Name Description
Value
Traffic Class
(cannot be
modified)
Lists the CoS values available Range: 0-7
Queue
Specifies the queue number to
which the CoS value is mapped
Range: 0-3
6.4.3 Port Priority
Column Name Description
Value
Port
(cannot be
modified)
Lists the available ports
Range: 1-24
Trunk
(cannot be
modified)
Displays the trunk number if
the port is a member of a trunk
•
None
•
Range: 0-3
Queue
Specifies the number of the
egress queue where untagged
packets are to be stored
Range: 0-3
Override
Specifies whether the CoS
value of ingress tagged packets
is to be used or not
•
enabled - tagged packets
are stored in the egress
queue specified in the
Queue field
•
disabled - packet CoS
value is used to
determine the egress
queue
6 Device Support
AlliedView™-EMS 3.10 QoS Manager User’s Guide
Page 53 of 128