Allied Telesis AlliedView-EMS 3.10 QoS MANAGER User Manual
Page 109
Property Name Description
Valid Values
This value can also be set to
"any".
MAC Type
Specifies the type of destination
MAC address on the frame.
•
L2UCAST
•
L2BMCAST
•
any
Protocol
Specifies the protocol of the
packet
This can be set by selecting any
of the following values:
•
IP
•
IPv6
•
ARP
•
IPX
•
NONIPIPX
•
any
This can also be set by entering
a 1- to 5- byte hexadecimal
value (00-FFFFFFFFFF).
Frame Relay
Data Link
Connection ID
Specifies the identification
number of a Frame Relay Data
Link Connection (DLC).
Range: any, 0-1023
PPP Index
Specifies the PPP interface
number.
This can be set by selecting a
pre-defined PPP interface ID
number.
PPP Protocol
ID
Specifies the network layer
protocol of the PPP
encapsulated packet.
This can be set by selecting any
of the following values:
•
IP
•
IPv6
•
any
This can also be set by entering
a 4-byte hexadecimal value
(00000000-FFFFFFFF).
Source IP
Address
Specifies the source IP Address
(either host or host/subnet) of
an IP packet
This can be set by entering an
IPV4 or IPV6 address using the
following format:
•
IPv4 address[/mask] -
IPv4 is in dotted decimal
notation, mask is 0..32.
•
IPv6 address[/mask] -
IPv6 is in colon separated
hex digit notation, mask
AlliedView™-EMS 3.10 QoS Manager User’s Guide
Page 109 of 128