Allied Telesis AlliedView-EMS 3.10 QoS MANAGER - Manual (Page 120)

Property
Name
Description Valid Values
• NNN.NNN.NNN.NNN
• NNN.NNN.NNN.NNN/M
Where M = 0-32.
Destination IP
Address
Specifies the destination IP
address (either host or subnet)
of an IP packet.
This can be set by entering an
IP Address in dotted decimal
notation with an optional mask
• NNN.NNN.NNN.NNN
• NNN.NNN.NNN.NNN/M
Where M = 0-32.
IP DSCP Specifies the Code Point bits of
the DiffServ field of an IP
packet.
This can be set by entering one
or more integers from 0-63.
Input can be a comma
separated list or a range
(specified as m-n) or a
combination of both. (e.g. 2, 4-
7)
This value can also be set to
"any".
IP Protocol Specifies a Layer 4 IP protocol
of an IP packet.
This can be set by selecting any
of the following values:
• TCP
• UDP
• ICMP
• IGMP
• NONTCPUDP
• any
This can also be set by entering
an integer from 1-255.
IP Type of
Service Specifies the value of the
precedence field within the
TOS (Type of Service) byte of
an IP packet.
Range: any, 0-7
Destination
IPX Address Specifies the destination
network address of an IPX
packet.
This can be set by entering an a
4-byte hexadecimal value.
(00000001-FFFFFFFF)
Source IPX
Socket Specifies the source IPX socket
number of an IPX packet. This can be set by selecting any
of the following values:
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 120 of 128