Allied Telesis AlliedView-EMS 3.10 QoS MANAGER - Manual (Page 24)

SHA
Use HMAC-SHA-96 protocol
Authentication Password
If the Security Level is "Auth / No Priv" or "Auth / Priv", you need to
specify an Authentication Password that is configured for the User
Account Name on the target device.
Privacy Protocol
If the Security Level is "Auth / Priv", you need to specify a Privacy
Protocol. This is the available Privacy Protocol:
DES
Use Data Encryption Standard
Privacy Password
If the Security Level is "Auth / Priv", you need to specify a Privacy
Password that is configured for the User Account Name on the target
device.
Login
User Name
This is the account name to be used to log in to the device. By default,
this field is set to manager.
Password
This is the password for the account to be used.
Retry
Timeout
The number of seconds QoS Manager waits before it determines that the
device is not responding. By default, this value is set to 5 seconds.
Count
The number of times QoS Manager sends SNMP messages to the agent
before giving up. By default, this value is set to 2 retries.
5.1.2 Close
This option closes the active connection with the device and empties the
QoS/CoS Information Window.
Note - This option is not available if QoS Manager is not yet connected to a
device.
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 24 of 128