Allied Telesis AlliedView-EMS 3.10 QoS MANAGER User Manual
Page 47
Property
Name
Description
Valid Values
following:
•
NCP
•
SAP
•
RIP
•
NNB
•
DIAG
•
NLSP
•
IPXWAN
•
any
Source MAC
Address
Specifies the source MAC
address of the packet.
This can be set by entering a
MAC address string using the
following format:
•
XX-XX-XX-XX-XX-XX
This can also be set to "any".
Destination
MAC Address
This parameter specifies the
destination MAC address of the
packet.
This can be set by entering a
MAC address string using the
following format:
•
XX-XX-XX-XX-XX-XX
This can also be set to "any".
Match1
Specifies the actual data to
match
This can be set by entering a 2-
byte hex number. (0000-FFFF)
Mask1
Specifies whether the
corresponding bit in the
Match1 parameter is "on" for a
match or "don't care" for a
match.
This can be set by entering a 2-
byte hex number. (0000-FFFF)
Offset1
Specifies the location or offset
where the pattern for Match1
is to be checked.
Range: 0-62
Match2
Specifies the actual data to
match
This can be set by entering a 2-
byte hex number. (0000-FFFF)
Mask2
Specifies whether the
corresponding bit in the
Match2 parameter is "on" for a
match or "don't care" for a
match.
This can be set by entering a 2-
byte hex number. (0000-FFFF)
Offset2
Specifies the location or offset
where the pattern for Match2
Range: 0-62
AlliedView™-EMS 3.10 QoS Manager User’s Guide
Page 47 of 128