2 flow groups, 1 qos information window, 2 add/modify flow group – Allied Telesis AlliedView-EMS 3.10 QoS MANAGER User Manual
Page 123: 3 traffic classes, Flow groups, Traffic classes
Property
Name
Description
Valid Values
Destination
UDP Port
Specifies the UDP destination
port of an UDP/IP packet.
Range: any, 0-65535
6.9.2 Flow Groups
6.9.2.1 QoS Information Window
Column Name
Description
Flow Group ID
Lists the ID of Flow Groups available
Description
A brief description of the Flow Group.
Classifiers
List of Classifiers associated with this Flow
Group
6.9.2.2 Add/Modify Flow Group
Property Name Description
Valid Values
Flow Group ID
(cannot be
modified)
Specifies the unique identifier
for the flow group.
Range: 0-1023
Description
Specifies a brief description of
the Flow Group.
To set this value, enter an
alphanumeric string from 1-15
characters.
Mark Value
This parameter specifies a
replacement value to write into
the DSCP (TOS) field for all
packets.
Range: none, 0-63
Priority
Specifies the priority that
traffic belonging to this Flow
Group has.
Range: none, 0-7
RED ID
Specifies the Random Early
Detection Curve to be used by
the Random Early Detection
algorithm when dropping
packets to avoid congestion.
Range: none, 0-47
Classifier List Specifies a list of the Classifiers
currently assigned to this Flow
Group.
Select from a list of available
classifier IDs.
6.9.3 Traffic Classes
6.9.3.1 QoS Information Window
Column Name
Description
Traffic Class ID
Lists the ID of Traffic Classes available
Description
A brief description of the Traffic Class
AlliedView™-EMS 3.10 QoS Manager User’s Guide
Page 123 of 128