5 ports, 6 scheduling, 7 quick setup – Allied Telesis AlliedView-EMS 3.10 QoS MANAGER User Manual
Page 126: Ports, Scheduling, Quick setup
Property Name Description
Valid Values
Description
Specifies a brief description of
the Policy.
To set this value, enter an
alphanumeric string from 1-15
characters.
DTC Percent Specifies the percentage of
port bandwidth allocated to the
default traffic class for the
policy.
Range: 0-100
Traffic Class
List
Specifies a list of the Traffic
Classes currently assigned to
this Policy.
Select from a list of available
Traffic Class IDs.
6.9.5 Ports
Column Name Description
Valid Values
Port
(cannot be
modified)
Lists the ports available
Available ports will depend on
the device model
Policy
Specifies the policy to associate
with the port
Select from a list of available
policies
6.9.6 Scheduling
Column Name Description
Valid Values
Hardware
Scheduler
Controls the method in which
packets are removed from the
egress queues and subsequently
processed.
•
Strict
•
Lower Priority
•
Internal Memory
6.9.7 Quick Setup
Property Name Description
Valid Values
Source UDP
Port
Specifies the UDP source port
of a TCP/IP packet.
Range: 0-65535.
Default for VOICE: 1719
Default for VIDEO: 1024
Priority
Specifies the priority that will
be assigned for this setup.
Range: none, 0-7
Default for VOICE: 7
Default for VIDEO: 4
Maximum
Bandwidth
Specifies the maximum
bandwidth available to this
setup.
This can be set by entering a
value using one the following
formats:
•
0-16000000 kbps
•
0-16000 Mbps (decimal
point supported)
•
0-16 Gbps (decimal point
AlliedView™-EMS 3.10 QoS Manager User’s Guide
Page 126 of 128