1 at-8000s series, 1 general, 2 port – Allied Telesis AlliedView-EMS 3.10 QoS MANAGER User Manual
Page 32: At-8000s, Eries, At-8000s series
6.1 AT-8000S Series
Topics:
•
•
•
•
•
•
6.1.1 General
Setting
Description
Value
QoS Mode
Enables/Disables quality of
service (QoS) on the device
•
enabled
•
disabled
Trust Mode
Configures the system to the
basic mode and trust state. It is
used to specify whether the
ports are trusted and which
field of the ingress packets to
use to classify traffic.
•
CoS - ingress packets are
classified using packet
CoS values. Untagged
packets are classified
using the default port
CoS value.
•
DSCP - ingress packets
are classified using
packet DSCP values
6.1.2 Port
Column Name Description
Value
Interface
(cannot be
modified)
Lists the interfaces (ports and
channels) available
The available interfaces will
depend on the device model
and configuration.
•
standalone - e1, e2..en
•
stacked - 1/e1, 1/e2..1/en,
2/e1, 2/e2..s/en
•
channels - ch1, ch2..chn
where:
•
n = port/channel number
•
s = stack id
AlliedView™-EMS 3.10 QoS Manager User’s Guide
Page 32 of 128