2 flow groups, Flow groups, 1 qos information window – Allied Telesis AlliedView-EMS 3.10 QoS MANAGER User Manual
Page 56: 1 add/modify flow group
Property
Name
Description
Valid Values
Where M = 0-32.
Destination IP
Address
Specifies the destination IP
Address (either host or
host/subnet) of an IP packet.
This can be set by entering an
IP Address in dotted decimal
notation with an optional mask
•
NNN.NNN.NNN.NNN
•
NNN.NNN.NNN.NNN/M
Where M = 0-32.
Source TCP
Port
Specifies the TCP source port
of a TCP/IP packet.
Range: 0-65535
Destination
TCP Port
Specifies the TCP destination
port of a TCP/IP packet.
Range: 0-65535
Source UDP
Port
Specifies the UDP source port
of an UDP/IP packet.
Range: 0-65535
Destination
UDP Port
Specifies the UDP destination
port of an UDP/IP packet.
Range: 0-65535
TCP Flags
Specifies the TCP flags of a
TCP/IP packet.
This can be set by selecting any
of the following values:
•
URG
•
ACK
•
RST
•
PSH
•
SYN
•
FIN
6.5.2 Flow Groups
6.5.2.1 QoS Information Window
Column Name
Description
Flow Group ID
Lists the ID of Flow Groups available
Description
A brief description of the Flow Group.
Classifiers
List of Classifiers associated with this Flow
Group
6.5.2.1 Add/Modify Flow Group
Property Name Description
Valid Values
Flow Group ID
(cannot be
modified)
Specifies the unique identifier
for the Flow Group.
Range: 0-1023
AlliedView™-EMS 3.10 QoS Manager User’s Guide
Page 56 of 128