Allied Telesis AlliedView-EMS 3.10 QoS MANAGER User Manual
Page 23
SNMP v3 Settings dialog box
User Account Name
This is the SNMPv3 User Account to be used for accessing the MIB of the
target device. Make sure to specify a User Account that has already been
configured on the target device.
Security Level
This is the Security Level for the User Account Name that you have
specified. Make sure to set the Security Level that is configured for the
User Account Name on the target device.
These are the available Security Levels:
No Auth / No Priv
This Security Level uses no authentication and no privacy.
Auth / No Priv
This Security Level uses authentication without privacy.
Auth / Priv
This Security Level uses authentication and privacy.
Authentication Protocol
If the Security Level is "Auth / No Priv" or "Auth / Priv", you need to
specify an Authentication Protocol that is configured for the User
Account Name on the target device.
These are the available Authentication Protocols:
MD5
Use HMAC-MD5-96 protocol
AlliedView™-EMS 3.10 QoS Manager User’s Guide
Page 23 of 128