Allied Telesis AlliedView-EMS 3.10 QoS MANAGER User Manual
Page 74
Property
Name
Description
Valid Values
Class
acknowledges any
previous bandwidth class
assigned to flows
processed by the default
traffic class.
•
YES
Mark Value Specifies an explicit value
to use as an index into the
DSCPMAP table when the
premarking parameter is
usemarkvalue.
•
0-63
•
none
Maximum
Bandwidth
Specifies the maximum
bandwidth available to the
traffic class.
This can be set by entering a value using
one the following formats:
•
0-16000000 kbps
•
0-16000 Mbps (decimal point
supported)
•
0-16 Gbps (decimal point
supported)
•
none
Max Burst
Size
Specifies the burst
tolerance for the
Maximum Bandwidth
parameter.
This can be set by entering a value using
one the following formats:
•
0-16777216 bytes
•
0~16384 KB (decimal point
supported)
•
0~16 MB (decimal point
supported)
•
0~0.015628 GB (decimal point
supported)
Note
- Byte measures can have the value
b,k,kb,m,mb,g,gb (case insensitive)
Minimum
Bandwidth
Specifies the minimum
bandwidth reserved for
the traffic class.
This can be set by entering a value using
one the following formats:
•
0-16000000 kbps
•
0-16000 Mbps (decimal point
supported)
•
0-16 Gbps (decimal point
supported)
•
none
Min Burst Specifies the burst
This can be set by entering a value using
AlliedView™-EMS 3.10 QoS Manager User’s Guide
Page 74 of 128