Allied Telesis AlliedView-EMS 3.10 QoS MANAGER - Manual (Page 8)

3.1 Initial Window
If the target host is not specified, or if one or more connection parameters do
not match what is configured on the host, the following window appears.
Initial Window
To specify a target host from this window, select File → Open . If the target
host is a device model that is supported by QoS Manager, the QoS/CoS
Information Window displaying the target host's QoS/CoS configuration will
appear.
3 Main Window
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 8 of 128