Konica Minolta eCopy - Manual (Page 116)

108 | Configuring connectors
3 Select the Configure tab, then specify the settings.
Section Field Name Description
LDAP Server
Specifies the
information about
the server that will
provide the Global
Address List; the
same server is used
for sender
authentication if
LDAP
authentication is
enabled.
1
User Name The user name of an account that can access the LDAP
server, such as an LDAP DN (distinguished name). If
applicable, use the domain-qualified name, for
example, “ecopy\auser”. An account name is not
required if your server allows anonymous directory
lookups.
Password The account password. The password is encrypted
before it is saved.
Server The IP address, DNS name, or URL of the LDAP server
associated with the directory you want to use.
Port The LDAP port number. The default is 389. If this does
not work, try 3268.
Base DN The DN (distinguished name) of the base or root of the
directory in which to search.
This varies depending on the server you are using and
the portion of the directory you wish to search.
“dc=ecopy”, “cn=users”, “dc=ecopy, dc=com”, and
“ou=marketing,dc=ecopy” are all examples of
possible base DNs. If you leave this field blank,
ShareScan OP uses “dc=” and tries to obtain the
directory root from the LDAP server automatically.
Connect
Anonymously Select this option if your server allows anonymous
directory lookups.
Test After configuring the settings in the LDAP Server
section, test the connection to the LDAP server.
SMTP Server Server The IP address or DNS name of the SMTP server to use
for outgoing messages. The server must support
anonymous access.
Port The SMTP port number (default is 25).
Test After configuring the settings in the SMTP server
section, test the connection to the SMTP server.