Configuring the fax address format – Konica Minolta eCopy User Manual
Page 78
70 | Configuring connectors
Configuring the fax address format
For fax connectors, you must define the fax address format required by your fax server application
or Internet fax service.
To configure the fax address format:
1
In the console tree, click the name of the fax connector.
2
On the
Fax Format
tab, click the
Format
button. The
Fax Address Format
window opens.
3
Refer to the documentation for your fax application to obtain the correct format for fax
addresses. A sample format is shown below:
1
Start building the address by adding components. For example, to include a prefix, select
Prefix
from the list on the left and then click
Add
.
2
You can re-order the fax address components using the
Move Up
and
Move Down
buttons.
Important! Since fax application vendors change these formatting schemes frequently, make
sure you obtain the current format.
[FAX:Jane Doe@/FN=555-1212/CS=]
Recipient Name
Fax Number
Name Separator
Prefix
Fax Prefix
Cover Page Attached
Suffix