Konica Minolta eCopy - Manual (Page 179)

eCopy ShareScan OP Installation and Setup Guide | 171
7 Press Document Settings if you want to review the default settings, such as the file format (see
“Document Settings” on page 75). The document settings are grouped on two tabs: Services
and More .
Change any user-modifiable settings, then press OK .
8 When you have scanned all the pages in your document and are satisfied with the scanner and
document settings, press
Send (on a device with an embedded client) or Next (on a
ScanStation).
If prompted, enter any additional information requested by the connector. For example, if
Session Logon is not enabled for the system, and if the connector is configured to send scanned
documents from a personal mail account, the connector will prompt you to log on. Enter your
user credentials, then press
Next .
Note: The administrator can configure the connector to send scanned documents from a
generic ShareScan OP User account; in that case, you will not need to log on.