Konica Minolta eCopy - Manual (Page 75)

eCopy ShareScan OP Installation and Setup Guide | 67
3 Click Save , select or specify the profile name, then click Save .
To configure the Scan to eCopy Desktop connector to use Express:
There is no separate Express tab for Scan to eCopy Desktop. To provide Express functionality in a
Scan to eCopy Desktop profile, follow these steps:
1 Enable Session Logon.
2 On the Configure tab, select Allow Single recipients only and select Authenticate users .
3 Click Save , select or specify the profile name, then click Save .
eCopy Connector for
Captaris RightFax Enable Enables Express for the connector.
Billing Code 1 Includes the first billing code set on the Configure tab.
Test Tests that the billing code is correctly configured for
RightFax.
When you click Test, the labels of the fields Billing
Code 1 and Billing Code 2 change to reflect the field
titles shown on the Configure tab.
Billing Code 2 Includes the second billing code set on the
Configuration tab.
Description Description of the billing code.
Name The name of the fax recipient.
Fax Number The fax number to which the scanned document is
sent.
Note The text included in the body of the fax to which the
scanned document is attached
Attach Cover
Sheet Attaches a cover page to the fax.
Important! A cover sheet can only be sent with a fax if
the Use Cover Sheet option is enabled in the RightFax
FaxUtil client for the authenticated user (see your
RightFax documentation).
Note: Users must sign up for Scan to eCopy Desktop the first time they use the connector;
subsequently, the connector does not show the Recipient and Logon screens, and the
connector sends the scanned document directly to the inbox.
Section Field Name Description