Konica Minolta eCopy - Manual (Page 170)

162 | Managing and using the client application
Configuring ScanStation logon settings
You can configure the ScanStation to automatically start the client and log on as a specified user,
at system startup. If you do not do this, you must start the client manually each time you start the
ScanStation.
To configure ScanStation logon settings:
1 In the console tree, click Devices > <device_name> > Manage .
2 Select the ScanStation Logon tab.
3 Under Automatic Logon to Windows , specify the following options:
> Log on automatically at ScanStation startup with the following credentials: Select this
check box and then enter the user name, password, and domain information. When you
start or restart the PC, ShareScan OP automatically logs on to Windows using the logon
information.
> Use preceding credentials to start/stop the ScanStation OP Client: You must select this
check box, and specify the user name, password, and domain information, if you want to
start, stop, and restart the client from the Administration console.
> Automatically start ScanStation OP Client at startup (all users): Select this check box if
you want to start the ScanStation OP client as soon as a user logs on to the ScanStation or
after an automatic logon. If you are only using the specified logon information to start and
stop the client, users can log on to the ScanStation using credentials other than the ones
specified on this tab.
4 Click Save .
When you are remotely connected to the Administration console, you may find it useful to restart
the ScanStation. To do this, click
Reboot ScanStation on the ScanStation Logon tab. The target
ScanStation will display a warning that includes a 10 second waiting period.