Konica Minolta eCopy - Manual (Page 21)

eCopy ShareScan OP Installation and Setup Guide | 13
Installing a TWAIN driver
The eCopy ScanStation uses a TWAIN driver to get input from the scanning device. You must
install and configure the driver before licensing the scanning device.
Installing the Konica Minolta TWAIN driver
You can use Konica Minolta’s TWAIN driver Ver. 2 with ScanStations.
To install the driver:
1 Insert the eCopy ShareScan OP CD (Disk 2) in your drive.
2 Open the Konica Minolta folder, then navigate to the location where the driver is stored.
3 Double-click Setup.exe , then follow the installation instructions.
4 When the installation is complete, click Finish .