Konica Minolta eCopy - Manual (Page 146)

138 | Configuring eCopy Services
To enable the Bates Numbering Service:
1 In the console tree, click System Information > Properties and then select the Bates
Numbering tab.
2 Under Bates Numbering Properties , select the Enables Bates check box.
3 Click Save .
To create a new Bates Numbering format:
1 In the console tree, click System Information > Properties and then select the Bates
Numbering tab.
2 Click New and enter a name for the format. Then double-click the format name.
Note: You enable Bates Numbering for a specific connector on the connector’s Services >
Document Settings tab.