Konica Minolta eCopy - Manual (Page 86)

78 | Configuring connectors
Configuring Scanner Settings
Use Scanner Settings to attach scanner settings to a connector profile. For example, assume that a
user always needs Legal as the output paper size, with the content scaled down to 90%. You can
specify these settings in a profile so that the user does not have to change the settings at the
device.
If the device does not support a setting that you select, the connector uses the device’s default
settings.
To specify the Scanner Settings:
1 In the console tree, click <connector name> > Services , then click the Scanner Settings tab.
2 Specify the Scanner Settings for the connector.
3 Click Save , select or specify the profile name, and then click Save .
Setting Description
Enable Scanner
Settings Activates the scanner settings for this profile.
Input Paper Size Select the paper size from the list. The list contains a complete list of
paper sizes currently supported by the Services Manager.
The default setting is Use Default. This allows the profile to use the
default device setting.
Output Paper Size Select the paper size from the list. The list contains a complete list of
paper sizes currently supported by the Services Manager.
The default setting is Use Default. This allows the profile to use the
default device setting.
Scaling Set the value between 20 and 100 percent.
Resolution Select from all available supported resolutions between 100 – 600 dpi.
Two-Sided Select from the list of standard options, for example: single-sided,
double-sided (book type) and double-sided (calendar type).
Color Depth (Pixel) Select from the list of supported color types.