Konica Minolta eCopy User Manual
Page 41
Advertising
eCopy ShareScan OP Installation and Setup Guide | 33
3
Select a configured profile, such as “exchange_express”, then click
OK
. The
No. of Profiles
column now indicates that you have activated one connector profile.
4
In the
Device Properties
pane, click
Save
. When you run the client, it will display a button for
each active connector profile, up to a maximum of nine buttons. (If you are using the client
with Send to eCopy, the settings in the lower left corner of the screen will not appear.)
Advertising