Konica Minolta eCopy User Manual
Page 159
eCopy ShareScan OP Installation and Setup Guide | 151
During publishing, the status for each device is updated. If an error message appears in the Status
column for the device, double-click it to retrieve details about the error.
If the profile includes a connector that is not supported on a target device, Publish ignores the
connector. For example, assume that you created a group that includes profiles for Copy,
Exchange, Quick Connect, Scan to Desktop, and Fax via Print. You want to publish this group to a
ScanStation device and to an embedded device. The software will ignore Copy when it publishes to
an embedded device.
To create a new group of profiles:
1
In the console tree, right-click
Devices
and then click
Publish connector profiles
.
2
In the
Base location
field, specify where you want to save the publishing information.