Konica Minolta eCopy - Manual (Page 167)

eCopy ShareScan OP Installation and Setup Guide | 159
Starting and stopping the ScanStation client from the console
You can also start the client by clicking Start > Programs > eCopy Applications > ScanStation
Client .
If the Windows Task Manager is open when you start the ScanStation client, the client will
automatically close it.
To start the ScanStation client from the Administration console:
1 In the console tree, click Devices > <device_name> > Manage .
> The Manage ScanStation OP Client pane displays client information and enables you to
configure settings for the client.
> On the Status tab, the information in the Driver Name field is based on the product key.
2 Select Use TWAIN user interface for settings if you want the client to display the interface
provided by the TWAIN driver.
3 Select the Settings tab, enter a password in the Password (Exit) field, then click Save .
Specifying an exit password prevents unauthorized users from quitting the client application.
4 Select the ScanStation Logon tab.
Make sure that this tab contains logon credentials. The client will not start if the credentials
fields are blank.
Select the Use preceding credentials to start/stop the ScanStation OP Client check box.
5 Select the Status tab.
6 Under Client Status , click Start .
The client application opens on the touch screen. A button appears for each connector that you
have configured for the device.
The scanner settings that you specified on the device’s Scanner Settings tab are displayed in
the lower left corner of the client screen, unless you enabled use of the TWAIN driver’s
interface.
To stop the client from the Administration console:
1 In the console tree, click Devices > <device_name> > Manage .
2 Under Client Status , click Stop .
To stop and then restart the client from the Administration console:
1 In the console tree, click Devices > <device_name> > Manage .
2 Under Client Status , click Restart .